Auerswald COMpact 4000 Operation Manual page 84

Installation and Commissioning
ISDN End Devices
Connecting the Cable and the Wall Sockets to the Internal U
• Another end device or two COMfortel 1200/1400/1600/2600 units:
a) Insert the U
b) Connect the end devices to the U
Further steps:
• To finish commissioning, you need to set up an internal number for the end device in the
configuration manager.
Connecting the Cable and the Wall Sockets to the Internal U
Requirements:
• Cover panel is removed
• Enabled operating mode "U
Note: The default setting is „S
• Terminators enabled at the internal U
• Installation cable (e. g. J-Y(St)Y 2x2x0.6)with the following characteristics:
– One twisted pair per U
– Unscreened; however: screened for unfavourable conditions, for example, near a
strong transmitter or an electrical power line
• U /S adapter
P0 0
Note: For connecting one single COMfortel 1200/1400/1600/2600 system
telephone, a U
• ISDN wall sockets (e. g. IAE or UAE8)
84
P0
/S adapter into the RJ-45 socket on the internal U
P0 0
internal" on the U
P0
external" for port 1 and „S
0
port
P0
port
P0
/S adapter is not necessary.
P0 0
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Port
/S adapter.
P0 0
port in question
P0
port.
P0
Port
P0
internal" for port 2.
0