Extension Settings - Auerswald COMpact 4000 Operation Manual

Routing via exception numbers (VoIP + GSM + LCR)
Requirements:
• Exception numbers (VoIP/GSM routing) are set up
• Selected option PBX (2nd call channel) under Call Forwarding via
The device checks whether the destination number involved in call forwarding for external
numbers has been set up as an exception number. If so, the call is sent along the configured
path. If the destination number has not been entered in the routing table, the call to be
forwarded is sent either via a free call channel that is assigned to the port or via any free call
channel (For call forwarding via the PBX, use any available call channel

Extension Settings

Proceed as follows:
• Separately for PBX base numbers
• Using the Configuration Manager (page Public switched tel. networks > ISDN connec-
tions > Extension numbers PTP connection)
Requirements:
• Configured PBX base number
Extension (DDI number)
If you want an extension number to be different from the ones used in linear call distribution, or
if an extension number is needed for a different function (e.g. remote configuration, CLIP no
screening), you must also enter it in the phone number list (click on
all the extension numbers for a PTP connection that is not running linear call distribution.
Note: You can input up to 250 external numbers for land line and VoIP
connections in the PBX. In other words, the total maximum number of MSNs,
DDI numbers and additional numbers is 250.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
ISDN Connection
Extension Settings
).
New). You must enter
579