Auerswald COMpact 4000 Operation Manual page 612

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 4000:

Table of Contents

VoIP Account Settings

you can enter a zero both as a single number (e.g. 0 to 99, as is usually the

case) and as a digit in the set number of places in extension numbers (e.g.

If linear call distribution for the PTP connection is enabled (page Public

switched tel. networks > Call distribution), and if the internal numbers

match the external extension numbers, the system automatically performs a

1:1 assignment for the extension numbers in the extensions block. If an

extension cannot be assigned, the fallback call distribution function is

If you want an extension number to be different from the ones used in linear

call distribution, or if an extension number is needed for a different function

(e.g. remote configuration, CLIP no screening), you must also enter it in the

phone number list (click on

For example, for extensions block 0 to 99: enter extension 0 as an extension

and assign it in the call distribution.

For example, for extensions block 00 to 99: Enter the individual extension

numbers 00 to 09 as an extension number and assign them during call distri-

bution. The PBX will then only react when the number of places is reached,

for example, if the caller dials 00 as an extension number. In contrast, if the

caller only dials 0, the fallback call distribution function is enabled as soon as

the time for selecting a suffix dialling digit has passed.

You must enter all the extension numbers for a PTP connection that is not

running linear call distribution.

Ringtone for the above-mentioned PTP connection

The ringtone specifies which sequence of sounds is used to signal external calls to the phone

numbers of the PTP connection to internal subscribers on the PBX.

Individual ringtones can be assigned to extension numbers that were input in

different ways.

See the Settings > Ring tones section for information about exceptions to

signalling and sound sequences.

COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016

Show Quick Links

Table of Contents