Settings
Exchange Line Request
Configuring the Local Area Code
2. In the Country code entry field, enter the country code for the location of the instal-
lation. Possible entries:
Digits (e.g.: 0049 for Germany)
Configuring the Local Area Code
The area codes are necessary for some functions of the PBX (e.g. Call Through, Call
restrictors/Call deblockers).
Note: The prefixes for Voice over IP are set individually for each account
(Public switched tel. networks > Voice over IP (VoIP) > Accounts >
Configure).
Proceed as follows:
• Using the configuration manager
1. Open the page Public switched tel. networks > Exchange line request.
2. In the Area code entry field, enter the local area code for the location of the instal-
lation. Possible entries:
Digits (e.g.: 030 for Berlin)
Note: Some countries (e.g. Denmark, Greece, Luxembourg) do not have a
fixed number sequence for their area codes. If this also applies to the location
at which the PBX is installed, you do not need to enter an area code.
688
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016