Opening The Configuration Manager; Telephoning; Outgoing Calls/Exchange Line Request - Auerswald COMpact 5200 Instruction Manual

Telephoning

and network environments described above. It is not possible to change the network
configuration by telephone without prior activation of the system.

Opening the Configuration Manager

Requirements:
• PC with a min. screen resolution of 1024 x 768
• Recommended Browser: Mozilla Firefox (current version), Google Chrome (current
version)
1. Enter the IP address of the PBX in the address field of the browser. Example for entering
the permanent IP address: https://169.254.1.240.
Since the PBX forces an HTTPS connection, your browser will provide a safety warning
(because of the missing safety certificate).
2. If necessary, transmit the safety certificate to your working environment (user and
browser profile).
3. Click with wizard (recommended).
4. Use the configuration wizard to carry out the system activation and configure the basic
settings.
Telephoning

Outgoing Calls/Exchange Line Request

When dialling phone numbers, the exchange line request type configured for the subscriber
must be noted. The PBX distinguishes three types of exchange line requests:
Automatic exchange line request (factory setting): Neither for the internal nor for the
external number a prefix is required (exception: ** for targeted VoIP access). The PBX
automatically distinguishes between internal and external numbers with the adjustment of the
dialled phone number and the internal numbering plan:
• If the phone number is contained in the telephone numbering list, the PBX establishes
an internal connection.
• If the phone number is not contained in the telephone numbering list the PBX establishes
an external connection.
Internal telephone: The user has to dial an external number with preceding exchange line
access number.
Direct exchange line telephone: For an external number no prefix is required. However,
the user has to dial an internal number with preceding **.
Note: The behaviour of COMfortel 1400 IP/2600 IP/3200/3500/3600 IP telephones
when numbers are being dialled depends on the set default account (see manual of
the phone). For COMfortel 1400 IP/2600 IP/3600 IP telephones as of firmware version
50
COMpact 5200/5200R/5500R - Instructions V03 03/2019