Exchange Line Transfer; Exchange Line Transfer Process; Configuring An Exchange Line Transfer - Auerswald COMpact 4000 Operation Manual

Exchange Line Transfer

A suitably authorised system telephone, for example, the telephone exchange, can transfer the
exchange line access required for an outgoing call to another internal telephone for a short
period of time. This is meaningful, for example, when this telephone is located in a publicly
accessible room and is only occasionally used for external calls by an employee.

Exchange Line Transfer Process

The exchange line transfer proceeds as follows:
• The requesting telephone must initiate an internal call using the system telephone
authorised to make the exchange in order to request exchange line access.
• After the function key assigned to exchange line transfer has been pressed on the system
telephone authorised for making exchanges, a confirmation tone is issued to both internal
subscribers and the internal call must be ended.
• The requesting telephone now has access to the exchange line settings configured for this
purpose. These exchange line settings remain until the first successful, outgoing external
call or until the time limitation has elapsed for initiating the external call.

Configuring an Exchange Line Transfer

Requirements:
• System telephone, that supports function keys for the exchange line transfer (optional, see
the telephone manual)
1. Configure a function key for the exchange line transfer on the system telephone
(optional, see the telephone manual).
2. Enable the authorisation Transfer of external calls externally for the transferred
telephone.
3. At minimum, configure the business exchange line authorisation Only incoming,
with emergency call for the requesting telephone.
4. Configure the following settings that apply to all of the telephones:
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Functions
Exchange Line Transfer
Exchange Line Transfer Process
301