Configuring Sub-Administrator Access - Auerswald COMpact 4000 Operation Manual

Settings
Protection from Unauthorised Access

Configuring Sub-Administrator Access

6. Enter the current Admin password in the Please confirm your changes with the
current admin password entry field.
7. Click Save.
Configuring Sub-Administrator Access
You can configure up to four sub-administrators. Each sub-administrator's sub-admin PIN and
sub-admin password correspond to their user PIN and user password.
Note: The user name that a sub-administrator uses for logging in to the
configuration manager is sub-admin. You can configure the sub-adminis-
trator's authorisation to access different pages in the configuration manager
on the Administration > Access authorisations page.
Proceed as follows:
• Separately for subscribers
• Using the configuration manager
1. Open the page Subscriber (scr.) > Phone numbers.
2. Click Configure in the line of the corresponding subscriber.
3. Click the Basic settings tab.
4. If necessary, change the sub-admin PIN of the relevant subscriber in the PIN entry
field. Possible entries:
Exactly 6 digits
Digits: 0-
678
Caution: A high level does not necessarily indicate a secure
password as this can also be reached by entering names and birth
dates in connection with special characters. However, names and
birth dates should not be used as passwords.
• To create a secure password you can consult, for example, the
guidelines of the German Federal Office for Information Security
(BSI, in German).
9
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016