Conference Calls; Initiating Conference Calls; Options During A Conference Call - Auerswald COMpact 4000 Operation Manual

Telephoning

Conference Calls

Initiating Conference Calls

Conference Calls
During a conference call, you are talking with two subscribers simultaneously.
Initiating Conference Calls
Requirements:
• A query call you initiated yourself
During a query call, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 3.
You are making a conference call.
Note:
If a hands-free telephone is involved in a conference with 3 internal
subscribers, echo or singing effects may occur.
You can also use this function on analogue telephones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
telephone).
On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the telephone).
A conference is not possible with a door terminal.

Options during a Conference Call

The following actions are possible during a conference call:
Initiating Splitting
When you end a conference call and want to talk to each of the conference call partners
separately one after the other, you can specifically put one of the conference call partners on
hold in the background.
150
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016