Table of Contents
Advertisement
Command Reference Guide
track <name>
Default Values
<administrative distance>
client-id
hostname "<string>"
60000CRG0-35E
Optional. Attaches a network monitoring track to the DHCP client. The
DHCP gateway route for this client will only reside in the route table while
the track is in the pass state. For more information on configuring track
objects, refer to
track <name> on page
By default, the administrative distance value is 1.
Optional. By default, the client identifier is populated using the following
formula:
TYPE: INTERFACE SPECIFIC INFO : MAC ADDRESS
Where TYPE specifies the media type in the form of one hexadecimal byte
(refer to
hardware-address on page 3052
types), and the MAC ADDRESS is the medium access control (MAC)
address assigned to the first Ethernet interface in the unit in the form of six
hexadecimal bytes. (For units with a single Ethernet interface, the MAC
ADDRESS assigned to Ethernet 0/1 is used in this field.)
INTERFACE SPECIFIC INFO is only used for Frame Relay interfaces and
can be determined using the following:
FR_PORT#: Q.922 ADDRESS
Where the FR_PORT# specifies the label assigned to the virtual Frame
Relay interface using four hexadecimal bytes. For example, a virtual Frame
Relay interface labeled 1 would have a FR_PORT# of 00:00:00:01.
The Q.922 ADDRESS field is populated using the following:
8
7
6
5
DLCI (high order)
DLCI (lower)
FECN BECN
Where the FECN, BECN, C/R, DE, and high order extended address (EA)
bits are assumed to be 0 and the lower order EA bit is set to 1.
The following list provides a few example DLCIs and associated Q.922
address:
DLCI (decimal) / Q.922 address (hex)
16 / 0x0401
50 / 0x0C21
60 / 0x0CC1
70 / 0x1061
80 / 0x1401
By default, the host name is the name configured using the Global
Configuration hostname command.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
1372.
for a detailed listing of media
4
3
2
EA
C/R
EA
DE
1
1984
Advertisement
Table of Contents
