Technical Data - Auerswald COMpact 4000 Instructions Manual

Important Information
number of different ports/interfaces. The PBX is structured modularly. It is suitable for use in
the commercial sector (small to midsize companies).
The PBX has a plastic casing for wall mounting. It is intended to be operated in closed rooms.
In addition, all of the devices connected to the system must be located in the building.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
Connection Options on the Basic Unit
30
230 VAC +/-10 %, 50 Hz
Max. 0.5 A
I
Min. 6 W, max. 48 W
(depending on the configuration level of the PBX)
Power supply from the PBX
0 to +40° Celsius
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70° Celsius
10 to 90 %, non-condensing
1 Ethernet port, connection via RJ-45 socket, 4 VoIP channels
for internal IP and Internet telephony, SIP-compliant in
accordance with RFC 3261; support for VoIP Codecs G.711
(ì-Law/a-Law), G.726, iLBC thereof one channel usable for
voice mail functions with one voice mailbox)
Important: It is not possible to use the voice mail channel
without inserted USB memory stick (not included in the
scope of delivery).
1 USB host port, connection via USB A socket
2 ISDN ports (1, 2), connection via RJ-45 socket or spring
clamp connection (4-core S
via jumper optionally switchable as an external S
internal S port and internal U
0
via DIP switch terminators switchable
8 internal analogue ports (1, 2, 3, 4, 5, 6, 7, 8), connection
via spring clamp connection (2-core)
, 2-core U
0 P0
port
P0
COMpact 4000 - Instructions V05 10/2018
),
port,
0