Technical Data - Auerswald COMpact 5000 Instructions Manual

• If you are still uncertain about how to use the product properly after reading the chapter
below, please contact your specialised dealer.
• Read the instructions for the device and keep them for future reference.
• In order to use some of the features, it is necessary to extend the hardware, release it in
the Upgrade-Center, contact the network provider about activating the feature and/or set
up via the PBX configuration manager.
The COMpact 5000 and COMpact 5000R devices are telecommunication systems; they will
be referred to as PBXs in the following. These PBXs connect various internal devices with
various public telecommunication networks, thereby enabling external and internal calls. For
this purpose, the PBXs provide a number of different ports/interfaces. The PBXs are
structured modularly. They are suitable for use in the commercial sector (small to midsize
companies).
The COMpact 5000 is a PBX with a plastic casing available for wall mounting.
The COMpact 5000R is a PBX with a 19" casing available for installation in a 19" rack. The
PBX is suitable for use in structured IT/telecommunication networks.
The PBXs are intended to be operated in closed rooms. In addition, all of the devices
connected to the system must be located in the building.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power (depending on the
configuration level of the PBX)
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
COMpact 5000/5000R - Firmware V6.8 - Instructions V04 04/2017
230 VAC +/-10 %, 50 Hz
Max. 0.4 A
I
COMpact 5000: min 7 W, max. 70 W
COMpact 5000R: min. 7 W, max. 70 W
Power supply from the PBX
0 to +40 °C
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70 °C
10 to 90 %, non-condensing
Important Information
35