Restoring Configuration Data From A Restoration Point - Auerswald COMpact 3000 analog Operating Manual

• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page SERVICE > Data backup > Restoration points.
Note: The insertion is also provided during the quick configuration using the
configuration wizard.
2. Click Insert restoration point.
A confirm action dialogue opens.
3. Click Next.
The restoration point is inserted. It is available in the Configuration file list field under
Restore old configuration data.

Restoring Configuration Data from a Restoration Point

The restoration can be carried out as follows:
• Via the configuration manager
Important: Restoring an old configuration overwrites the current configu-
ration data.
Note: A configuration file that was created with an older firmware version,
may possibly not contain all of the configuration data (for example, data for
new functions that were added by a firmware update).
Requirements:
– Configuration manager, opened with sufficient authorisation
– Inserted restoration point
1. Open the page SERVICE > Data backup > Restoration points.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Service and Maintenance
Backing Up and Recovering Configuration Data
Restoring Configuration Data from a Restoration Point
529