Software Extensions; Maximum Extension - Auerswald COMpact 5000 Setup Manual

Important Information
Note: Using the configuration manager, any number of available VoIP
channels can be reserved for internal and external calls.
Modules for retrofitting with an S

Software Extensions

In the Auerswald Upgrade Center, you can extend the PBX with the following
functions/resources against a fee:
Note: The PBX dongle required for the extension is part of the basic device.
Important: The system activation is mandatory for the operation of the
PBX.
The addition of VoIP channels and voice mail and fax boxes requires a
COMpact 4DSP module.
The Phonebook Gigaset is available only in connection with a COMfortel
DECT IP1040 Base.

Maximum Extension

The PBX can be operated with up to 32 internal subscriber connections (ana-
logue, VoIP, and ISDN).
Note: One internal S
tions in this case.
An S
Application is not considered in the calculation of this limit.
The PBX can be operated with a maximum of 14 external analogue, VoIP and
ISDN channels.
Maximum number of modules:
56
System activation
Automatic receptions
Auerswald hotel function for all subscribers
LAN-TAPI for all subscribers
8 additional VoIP channels for the COMpact 4DSP module
20 additional voice mailboxes and 20 additional fax boxes for the COM-
pact 4DSP module
SIP convenience package (e. g. BLF, MWI) for VoIP end devices
Support PBX Call Assist
Phonebook Gigaset
0
or U port set to the option free in the port configuration under
0 P0
COMpact 2FXO module: 3
port are not available for this PBX.
2M
port corresponds to two internal subscriber connec-
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014