Configuring Sub-Administrator Access - Auerswald COMpact 3000 analog Operating Manual

Further steps:
– Save your settings before you leave the page.

Configuring Sub-Administrator Access

You can configure up to four sub-administrators. Each sub-administrator's sub-admin PIN and
sub-admin password correspond to their user PIN and user password.
Note: The user name that a sub-administrator uses for logging in to the
configuration manager is sub-admin.
The configuration can be made as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open one of the following pages:
• CONFIGURATION > Internal numbers > Analogue subscribers
• CONFIGURATION > Internal numbers > ISDN subscribers
• CONFIGURATION > Internal numbers > VoIP subscribers
2. If necessary, change the sub-admin PIN of the relevant subscriber in the PIN entry
field. Possible entries:
Exactly 6 digits
Digits: 0-
Note:
All PINs in the PBX are unique. For this reason, you cannot assign the same
PIN twice.
Avoid using birthdays or specific dates as PINs. This makes it easy for an
attacker to find out the correct PIN. Don't use PINs such as 111111 or 123456
that are easy to guess.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
9
Protection from Unauthorised Access
Configuring Sub-Administrator Access
Settings
495