Configuring The Pbx Remotely With (Auerswald) Remote Access Server Via The Internet - Auerswald COMpact 5200 Advanced Information

phone's COMfortel Set configuration software on the PC you are going to
use.
Configuring internal ISDN System Phones Remotely via a PBX's
External S Port
0
You can remotely configure the ISDN system phone indirectly via an
external ISDN connection using the PBX and a device which is connected
to both the external S
controller). The PBX must be configured accordingly. Before you can do
this, you must install the ISDN system phone's configuration software on the
PC you are going to use.
Configuring the PBX Remotely with (Auerswald) Remote Access
Server via the Internet
Requirements:
• PBX with existing connection to the Internet (DSL)
• In the PBX configured ARA PIN and remote switching number and also
enabled dealer access over the Internet
– Using the Configuration Manager (page Administration > Configu-
ration à distance)
• Computer with existing connection to the Internet (DSL)
• DTMF-capable phone or DTMF dialler
• Access data for registration at protected Auerswald services
• Knowledge of the serial number of the PBX
• Knowledge of user name and password for the Configuration Manager
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Remote Configuration and Alternative Connection Options
port on the PBX and to the PC (for example ISDN PC
0
Functions, Uses, Concepts
59