Analogue Terminals At The Analogue Port; Isdn Terminals At The Internal S0 Port - Auerswald COMpact 5200 Instruction Manual

Analogue Terminals at the Analogue Port

Connection possibilities:
• Analogue telephones
• Analogue fax devices
• Analogue answering machine
• Modems
• a/b audioboxes
• a/b door terminals (e.g. TFS-
Dialog 200/300/400, TFS-
Universal plus, TSA a/b)
A wall socket (RJ-11 or, within
Germany, TAE) must be connected
via a fixed laid cable with the
terminal clamps of the internal
analogue port.
ISDN Terminals at the Internal S
Connection possibilities:
• System telephones COMfortel 1200/1400/1600/2600 (firmware version 2.0A or later)
• ISDN telephones in accordance with the Euro ISDN Standard (DSS1)
• ISDN PC controllers in accordance with the Euro ISDN Standard (DSS1)
Important: For COMfortel 1400/2600 with answering machine: In order to ensure that
the full scope of functions is available, you should connect only 1 telephone per port.
Requirements:
• Enabled operating mode "S
• Enabled terminators in the PBX at the internal S
in two directions)
operating mode "S internal"
0
COMpact 5200/5200R/5500R - Instructions V03 03/2019
internal analogue ports
Port
0
internal" at the S port in question
0 0
0
terminators enabled
RJ-11 wall socket
TAE wall socket
port in question (exception: bus wiring
Installation
55