Table of Contents
Advertisement
The S 0 Module: Description and Connection
The COMmander 4S
module is contained once in the extent of supply
0
of the COMmander Basic. It has 4 S
switched as internal or external S
attachment circuit board that serves as a jumper. In the extent of supply
the S
ports 1 and 3 are set as external S
0
nal S
ports.
0
The S0 Module: Description and Connection
Description of the COMmander 4S
ports that can alternatively be
0
ports. The switching is done by an
0
ports, the other two as inter-
0
Module
0
The connection to the S
ports is possible via fixed wiring to the 4
0
clamps b2, b1, a1 and a2.
Besides this you have a western modular plug on the S
Depending on the use as an internal or external S
nect directly an ISDN device or the NT to the COMmander Basic.
Pic. 9: COMmander 4S
0
Connection clamp (detachable) of S
Western modular plug of S
0
Connection clamp (detachable) of S
Connection clamp (detachable) of S
Western modular plug of S
0
Connection clamp (detachable) of S
Jumper circuit board internal/external of S
Jumper circuit board internal/external of S
Jumper circuit board internal/external of S
Jumper circuit board internal/external of S
DIL switch for termination resistors of S
DIL switch for termination resistors of S
DIL switch for termination resistors of S
DIL switch for termination resistors of S
Plug for attachment to the mainboard.
port 1 and 3.
0
port, you can con-
0
module
port 1.
0
port 1.
port 2.
0
port 3.
0
port 3.
port 4.
0
port 1.
0
port 2.
0
port 3.
0
port 4.
0
port 1.
0
port 2.
0
port 3.
0
port 4.
0
17
Advertisement
Table of Contents
