Analogue Terminals At The Analogue Port; Isdn Terminals At The Internal S0 Port - Auerswald COMpact 4000 Instructions Manual

Installation
amounts of data (e. g. downloads), we recommend upgrading to a data transmission rate
of 100 Mbps. For this purpose, replace not only all of the active network components (e. g.
switch and router), but also all of the passive network components (e. g. cables and wall
sockets). For a reliable support of 100 Mbps, you need cables and wall sockets of at least
Category 5 (CAT 5).
When using a switch with PoE function, a separate power supply (e. g. via a power plug)
is not required for connected VoIP telephones, always provided they support PoE.
• For the use of DiffServ for prioritising language packages: DiffServ support of all active
network components available and enabled
• NAT traversal should be carried out either by the PBX or by a well-functioning SIP-aware
router
Note: If the router is not SIP aware, several of the ports on the router necessary for VoIP
data communication must be enabled (RTP port and SIP UDP ports) (port forwarding). A
list of the ports used in the PBX can be found in the Configuration Manager of the PBX
under Overviews > Ports.
Caution: Opening a port on the NAT router is a security risk.
•Take additional protection measures.
Important: If you want to integrate the PBX into an existing network, contact the
responsible system administrator. Making changes to an existing network can cause
considerable malfunctions.

Analogue Terminals at the Analogue Port

Connection possibilities:
• Analogue telephones
• Analogue fax devices
• Analogue answering machine
• Modems
• a/b audioboxes
• a/b door terminals (e.g. TFS-Dialog
200/300/400, TFS-Universal plus,
TSA a/b)
A wall socket (RJ-11 or, within
Germany, TAE) must be connected via
a fixed laid cable with the terminal
clamps of the internal analogue port.
ISDN Terminals at the Internal S
Port
Connection possibilities:
• System telephones COMfortel 1200/1400/1600/2600 (firmware version 1.6A or later)
46
internal analogue ports
0
COMpact 4000 - Instructions V05 10/2018
RJ-11 wall socket
TAE wall socket