Expert Configuration, Analogue Connection - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Note: If you have updated your firmware from Version 6.4 to 6.6, the

telephone allows emergency calls by default.

The analogue connection has a phone number. The phone number is assigned by the provider

for the connection.

Freely selectable name. This name is used to identify the phone number within the PBX.

The ringtone specifies which sequence of sounds is used to signal external calls to internal

subscribers on the PBX.

Note: See the Settings > Ring tones section for information about exceptions

to signalling and sound sequences.

Expert Configuration, Analogue Connection

Proceed as follows:

• Separately for analogue ports

• Using the Configuration Manager (page Public switched tel. networks > Analogue

connections > Phone numbers > Configure)

Requirements:

• External analogue port (optional, see Important Information > Product Details > Basic

Assembly and Extensions section)

Apply country settings for

Accepts the country settings for the selected country.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Analogue Connection

Expert Configuration, Analogue Connection

Compact 5000r