The PBX supports the following IP door terminals from other manufacturers:
For configuration/administration, the PBX can be connected to a separate PC
or to a local network (LAN).
For a CTI solution (LAN-TAPI), the PBX can be connected to a local network
(CTI server and CTI clients). This requires CTI software, e. g. PBX Call Assist.
Alternatively, we recommend the following software manufacturers:
The following telephones connected to the PBX are supported by the LAN-
TAPI:
Internal S
An internal S
an ISDN connection with the Point-to-Multipoint connection type and is suitable
for connecting to the following end devices:
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014
Series 20 IP from Telecom Behnke
SIP door terminal Maxi from Baudisch
TCS FBI 6101
ELCOM LBM-300
ESTOS (www.estos.de), supports Windows XP, Windows Vista,
Windows 7 and Windows 8
ilink (direct.ilink.de), supports Mac OS X as of version 10.4
COMfortel 1400 IP/2600 IP system telephones
COMfortel 3200/3500 system telephones
COMfortel VoIP 2500 AB system telephones
COMfortel 1200/1400 system telephones
COMfortel 1600/2600 system telephones
COMfortel 1100/1500/2500/2500 AB system telephones
ISDN telephones
Analogue telephones
Standard VoIP telephones (SIP)
Port
0
port (not included in the basic assembly) offers similar options as
0
COMfortel 1200/1400 system telephones
COMfortel 1600/2600 system telephones (as of firmware version 1.2C)
COMfortel 1100/1500/2500/2500 AB system telephones (as of firmware
version 4.4I)
COMfortel DECT 900 Bases for COMfortel DECT 900C/900
ISDN telephones in compliance with the Euro ISDN Standard (DSS1)
ISDN PC controllers in compliance with the Euro ISDN Standard (DSS1)
Important Information
59