Isdn Terminals At The Internal S Port - Auerswald COMpact 5000 Instructions Manual

• Analogue fax devices
• Analogue answering machine
• Modems
• a/b audioboxes
• a/b door terminals (e.g. TFS-
Dialog 200/300, TFS-Universal
plus, Telecom Behnke, Serie 20
a/b, Siedle DCA 650-02, Ritto
TwinBus TK-Adapter a/b, GIRA
TKS-TK-Gateway, ELCOM BTI-
200)
A wall socket (RJ-11 or, within
Germany, TAE) must be connected
via a fixed laid cable with the
terminal clamps of the internal
analogue port.
ISDN Terminals at the Internal S
Connection possibilities:
• System telephones COMfortel 1200/1400/1600/2600 (firmware version 1.6A or later)
• System telephones COMfortel 1100/1500/2500/2500 AB (firmware version 4.4I)
• Base stations COMfortel DECT 900 base for COMfortel DECT 900C/900
• ISDN telephones in accordance with the Euro ISDN Standard (DSS1)
• ISDN PC controllers in accordance with the Euro ISDN Standard (DSS1)
Important: For COMfortel 1400/2600 with answering machine: In order to ensure that the full
scope of functions is available, you should connect only 1 telephone per port.
Requirements:
• Enabled operating mode "S
• Enabled terminators in the PBX at the internal S
in two directions)
operating mode "S internal"
0
COMpact 5000/5000R - Firmware V6.8 - Instructions V04 04/2017
internal analogue ports
Port
0
internal" at the S port in question
0 0
terminators enabled
RJ-11 wall socket
TAE wall socket
port in question (exception: bus wiring
0
Installation
57