Internal Telephone Numbers; Possible Types Of Internal Telephone Numbers; More Information About The Internal Telephone Number Plan - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX

Internal Telephone Numbers

Possible Types of Internal Telephone Numbers

Internal Telephone Numbers
Up to 32 internal telephone numbers for subscribers or line groups can be allocated on the
PBX.
Internal phone numbers must be configured for the internal ports so that the connected end
devices are accessible. Each connected end device receives a subscriber telephone number.
If multiple internal end devices need to be accessible via a telephone number, a common line
group for the internal subscribers must first be configured.
Note: It is a good idea to create a telephone numbering plan for the internal
telephone numbers before allocation and then use the following steps to
transmit this to the PBX.
Possible Types of Internal Telephone Numbers
Internal telephone numbers are taken from the internal telephone number plan. The following
types are possible:
• Telephone numbers for subscribers
• Telephone numbers for line groups
• Basis telephone number for call parking
• CAPI dial-in numbers

More Information about the Internal Telephone Number Plan

The telephone number plan on the PBX includes the internal telephone numbers 10-9999. The
following telephone numbers have already been allocated from this number range:
• 701 to 706: Voice mailboxes
• 801 to 806: Fax boxes
• 8750 to 8799: Reserved for internal call distribution groups in the PBX
Note: Due to the permanent allocation of these internal telephone numbers,
the following telephone numbers can no longer be allocated: 70, 80, 87, 875-
879
348
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11