Creating A Call Restrictor (Outgoing) - Auerswald COMpact 3000 analog Operating Manual

Enables the call restrictor.
Disables the call restrictor. (No other action is required.)
4. Select the call restrictor you want in the corresponding business and private list
fields under Call restrictor (outgoing).
For fax boxes: Select the call restrictor you want in the Call restrictor (outgoing) list
field under Exchange line authorisation.
Note: The telephone numbers/ranges are entered in the call restrictor on the
page USER DATA > Call restrictor and deblocker > Call restrictor
(outgoing) - Restricted numbers. Click
Further steps:
– Save your settings before you leave the page.

Creating a Call Restrictor (Outgoing)

Ten call restrictors with a maximum of 100 telephone numbers/ranges total can be configured
(e.g., 10 call restrictors, each with 10 telephone numbers or 5 call restrictors, each with 20
telephone numbers).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page USER DATA > Call restrictor and deblocker > Call restrictor
(outgoing) - Restricted numbers.
2. Enter the name of the call restrictor in the Name entry field. The following entries are
possible:
Up to 16 digits
Digits and characters
3. Click .
4. Click in the line of the corresponding call restrictor.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Call Restrictor (outgoing) – Restricted Numbers
Creating a Call Restrictor (Outgoing)
to switch directly to this page.
Functions
299