Creating A Call Restrictor (Outgoing) - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Call Restrictor (outgoing) – Restricted Numbers

Creating a Call Restrictor (Outgoing)

4. Select the call restrictor you want in the corresponding business and private list
fields under Call restrictor (outgoing).
For fax boxes: Select the call restrictor you want in the Call restrictor (outgoing) list
field under Exchange line authorization.
Note: The telephone numbers/ranges are entered in the call restrictor on the
page USER DATA > Call restrictor and deblocker > Call restrictor
(outgoing) - Restricted numbers. Click
Further steps:
– Save your settings before you leave the page.
Creating a Call Restrictor (Outgoing)
Ten call restrictors with a maximum of 100 telephone numbers/ranges total can be configured
(e.g., 10 call restrictors, each with 10 telephone numbers or 5 call restrictors, each with 20
telephone numbers).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page USER DATA > Call restrictor and deblocker > Call restrictor
(outgoing) - Restricted numbers.
2. Enter the name of the call restrictor in the Name entry field. The following entries are
possible:
Up to 16 digits
Digits and characters
3. Click .
4. Click in the line of the corresponding call restrictor.
A page opens for creating telephone numbers/ranges for the call restrictor in
question.
216
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
to switch directly to this page.