Shutting Down And Switching Off - Auerswald COMpact 5200 Advanced Information

Shutting Down and Switching Off

If it is necessary to separate the PBX from the electric current (pull the
power plug of the PBX out of the socket and also of the accessory
equipment where required), the PBX will first have to be powered down
properly.
Proceed as follows for powering down and switching off the PBX:
Important: When shutting down the PBX, all of the connections to the
web server, all calls and all data services are terminated. Unsaved data
is lost.
• Immediate powering down.
– Using the Configuration Manager (page Administration > Mise à
jour/Redémarrage du firmware)
Note: The PBX is powered down immediately. All connected calls will be
disconnected.
• Delayed powering down.
– Using the Configuration Manager (page Administration > Mise à
jour/Redémarrage du firmware)
Note: The PBX is powered down only after all calls are finished.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Shutting Down and Switching Off
89