Table of Contents
Advertisement
30
Connection of a second Ringer Bell
Connect Door Opener
You are in need of the 2nd relay with the clamp labelled TO11/TO12
(Pic.
40) for switching the door opener for the first door terminal.
Pic. 39: Door bell button
If the customer likes to notice the ringing at places where he cannot
hear his telephone, you can connect a second ringer bell as shown in
Pic.
41.
The specifications for the second ringer bell can be learned in the
ter COMmander 2TSM analog Module on page
connect a simple door bell.
The configuration of the second ringer bell will be done with the config-
uration program COMset. In the extent of supply the second ringer bell
is switched off.
If you do not need all the door bell button inputs for the door ringing, you
are able to use the door bell button inputs as alarm inputs. In order to
obtain one alarm input, the door bell button input has to be reconfigured
with the configuration program COMset.
An alarm input can be connected to an alarm indicator output like in
Pic.
42.
You
will
get
COMmander 2TSM analog Module on page
Connection of a second Ringer Bell
10. It is not possible to
Connection of an Alarm System
more
details
in
the
10.
As
the
necessary
COMmander Basic, the use of an external transformer is necessary.
Please pay attention to the maximum ratings of the relay contacts (50 V/
1 A).
chap-
chapter
supply
voltage
is
not
offered
Pic. 40: Door opener
Pic. 41: Second ringer bell
Pic. 42: Alarm
by
the
Advertisement
Table of Contents
