Configuring The Ringer Frequency - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

– Public switched tel. networks > Analogue connections

– Public switched tel. networks > Voice over IP (VoIP) > Accounts

• Configuring the ringing tone for door calls.

– Using the configuration manager (page Devices > Door terminals)

• Configuring the ringer frequency.

– Using the configuration manager (page Settings > Basic settings)

Note: For internal calls and alarm calls the ringing tone is permanently set as

3 x short and Alarm.

Configuring the Ringer Frequency

The ringer frequency indicates the ringer voltage frequency signals the PBX calls to the internal

analogue subscribers.

Proceed as follows:

• Using the configuration manager

1. Open the page Settings > Basic settings.

2. In the Ringer frequency list field under General, select one of the available options.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Configuring the Ringer Frequency

Compact 5000r