Switching Ntp Server Service On/Off - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Switching NTP Server Service On/Off

Requirements:

• External S

port (optional, see chapter Important Information > Product Details > Basic

Assembly and Extensions)

• Disabled automatic updating of the PBX time via the network

1. Open the page Settings > Date/Time of the PBX.

2. Select or clear the After each ISDN call check box under AUTOMATIC SYNCHRO-

NISATION OF THE PBX TIME/DATE.

Switching NTP Server Service On/Off

If the NTP server service is enabled, the PBX can be used as an NTP server by other devices

in the network.

Proceed as follows:

• Using the configuration manager

Requirements:

• PBX connection to the network

1. Open the page Settings > Date/Time of the PBX.

2. Select or clear the NTP server service check box under AUTOMATIC DISTRI-

BUTION OF THE PBX TIME/DATE.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r