Table of Contents
Advertisement
42
The Default Factory Settings
The default factory settings listed here, can be re-established with a
push of a button (see
chapter Return to the Default Factory Settings
with internal Telephone Number Distribution on page
Alarm function:
Exchange line authorization:
external call ringing/external call distribution
External to External Transfer:
Call Waiting:
Do-not-disturb
Call forwarding (AWS):
Response time remote switching
Call forwarding from door terminal, external
Call forwarding from door terminal, internal
Connection without dialling/Automatic dialling:
Authorization for programming of subscriber CF:
Authorization for programming of group AWS:
Authorization of programming of MSN/DDI CF:
Busy after end of call:
Busy-on-Busy:
Direct exchange line telephone:
Firmware Update, with time automation:
FLASH timing for analog telephones:
Follow-me (Call forwarding):
Response time remote switching
Call charge registration with changing subscriber:
Call charge metering:
Call charge allowance:
Call charge rate:
Call data management:
Pick-up:
InterCom to system telephones:
Ringer rhythm for internal calls:
Ringer rhythm for external calls:
Automatic Configuration switching, time controlled:
Authorization for manual configuration switching:
Configuration dependent programming:
Short-Code Dialling authorization:
LCR:
Emergency call priority function:
Passwords:
Project number:
Programming devices:
Programming (CAPI) on internal S
Programming on internal telephone:
Programming of an CF from external telephone:
Switching relay, internal:
The Default Factory Settings
58).
deactivated
unrestricted exchange line authorization
no preset
with special exchange line access number only, limited to 15 minutes
deactivated, Call Waiting only, if call can be taken without finishing the other call and
no other telephone rings
deactivated
deactivated; are executed via the 2nd B channel
10 seconds
deactivated
analog subscribers off, ISDN subscribers on
deactivated
activated
deactivated
deactivated
activated
deactivated
deactivated
deactivated; from 4-8 a.m., simultaneous update of the system telephones
300 ms
deactivated
10 seconds
remain with the subscriber who established the call
activated
effective in case of private and business calls, but unlimited
depends on the PBX firmware version: 0,12 DM/charge unit or 0,06 EUR/charge unit
(rounding errors are accepted here)
the oldest calls are overwritten if the memory is full; telephone numbers are recorded
(private numbers truncated), free of charge calls (unsuccessful calls and incoming
calls are in this category) are not recorded
deactivated
deactivated
3 x short
1 x long (similar to Telekom)
deactivated
deactivated
for all configuration at the same time
deactivated
deactivated
activated
public password: 2, secret password: 1111, external password: 4321, private pass-
word: no preset, administrator password: no preset; user password: no preset
2-digit
not assigned, programming possible from each telephone
port:
permitted on all internal S
0
permitted with public password
not permitted
permitted
ports
0
Advertisement
Table of Contents
