Settings Voip Provider - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

The list of providers is saved to the (PC) data storage device in a file called

provider.tgz.

Selects an existing provider from the list of providers and uses that provider

as the basis for creating a new VoIP provider.

Settings VoIP Provider

Proceed as follows:

Separately for VoIP providers

Using the Configuration Manager (page Public switched tel. networks

> Voice over IP (VoIP page) > Provider > Configure)

Note: You can obtain the data for the settings either directly from the

VoIP provider or from suitable lists in the Internet.

Requirements:

For entering a URL: configured DNS server

For using a STUN server: IP operating mode IPv4

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Public switched tel. networks

Voice over IP (VoIP)

Commander 6000r