Voip Settings - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

VoIP Settings

The user password of the VoIP subscriber (as registration PIN or password)

STUN server (the same as in Step 6)

Size of the jitter buffer (the same as in Step 7)

Note: If the Internet connection on the PBX does not have a permanent IP

address, an account with a provider for dynamic DNS is also required

(e.g., dyndns.org). Enter the associated URL in the VoIP telephone as

registrar and domain (e.g., pbx.dyndns.org).

10. Check whether the VoIP subscriber was successfully registered on the PBX (see

Monitoring > Status internal subscriber).

11. If necessary, enable DiffServ in order to increase VoIP call quality (Quality of Service

VoIP Settings

Proceed as follows:

• Using the Configuration Manager (page Administration > VoIP Configuration)

Requirements:

• VoIP channels (see Important Information > Product Details > Basic Assembly and Exten-

sions section)

DISTRIBUTION OF THE VOIP CHANNELS

Channel reserved for voicemail/fax

Number of channels to be used for voice mail/fax and not for VoIP.

External VoIP channels

Number of VoIP channels to be used as external VoIP channels. The remainder of the available

VoIP channels are used as internal VoIP channels.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r