Technical Data - Auerswald COMpact 5000 Setup Manual

Pbx for analogue/isdn/internet telephony
Hide thumbs Also See for COMpact 5000:
Table of Contents

Advertisement

Available languages

Available languages

In order to limit the tasks the operator or user can perform, the configuration
manager is divided according to three authorisations:
Note: Telephony has always the highest priority in a PBX system, even
under heavy load conditions. Under heavy traffic it might happen that some
of the web pages of the configuration manager are not responding as fast
as usual.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014
Manage address book entries
Manage wake-up times
Manage call allowance accounts
Manage internal hold music/announcements
Manage data for Least Cost Routing
Service and maintenance
Administrator (admin)
Sub-administrator (sub-admin)
User
Important Information
230 VAC +/-10 %, 50 Hz
COMpact 5000: max. 0,4 A
COMpact 5000R: max. 0,4 A
I
COMpact 5000: min. 7 W, max. 70 W
COMpact 5000R: min. 7 W, max. 70 W
(depending on the configuration level of the PBX)
Power supply from the PBX
+0 to +40° Celsius
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70° Celsius
10 to 90 %, non-condensing
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compact 5000r

Table of Contents