Creating A Call Deblocker (Outgoing) - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Call Deblocker (Outgoing) – Release Codes

Creating a Call Deblocker (Outgoing)

Note: The telephone numbers/ranges are entered in the call deblocker on the
page USER DATA > Call restrictor and deblocker > Call deblocker
(outgoing) - Released numbers. Click
Further steps:
– Save your settings before you leave the page.
Creating a Call Deblocker (Outgoing)
Ten call deblockers with a total of a maximum of 100 telephone numbers/ranges can be confi-
gured (e.g., 10 call deblockers, each with 10 telephone numbers or 5 call deblockers, each with
20 telephone numbers).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page USER DATA > Call restrictor and deblocker > Call deblocker
(outgoing) - Released numbers.
2. Enter the name of the call deblocker in the Name entry field. The following entries are
possible:
Up to 16 digits
Digits and characters
3. Click .
4. Click in the line of the corresponding call deblocker.
A page opens for creating telephone numbers/ranges for the call deblocker in
question.
5. Enter the telephone number/range in the Telephone number entry field. The
following entries are possible:
Up to 20 digits
Digits
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
to switch directly to this page.
195