ADTRAN AOS Version R10.1.0 Command Reference Manual page 1998

Command Reference Guide
Syntax Description
static-group <address>
version [1 | 2]
Default Values
ip igmp immediate-leave
ip igmp last-member-query-interval
ip igmp querier-timeout
ip igmp query-interval
ip igmp query-max-response-time
ip igmp static-group
ip igmp version
Command History
Release 7.1
Release 8.1
Usage Examples
The following example sets the query message interval on the interface to 200 milliseconds:
(config)#interface atm 1.1
(config-atm 1.1)#ip igmp last-member-query-interval 200
60000CRG0-35E
Configures the router's interface to be a statically connected member of
the specified group. Packets received on the correct reverse path
forwarding (RPF) interface are forwarded to this interface regardless of
whether any receivers have joined the specified group using IGMP. Use
the no form of this command to remove a configured static group.
Sets the interface's IGMP version. Use the no form of this command to
return to the default setting.
No default
1000 milliseconds
2x the query-interval value
60 seconds
10 seconds
No default
Version 1
Command was introduced.
Asynchronous transfer mode (ATM) subinterface was added.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
1998