ADTRAN AOS Version R10.1.0 Command Reference Manual page 2001

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ATM Subinterface Command Set
ip mcast-stub helper-enable
Use the ip mcast-stub helper-enable command to assign the ip mcast-stub helper-address as the
Internet Group Management Protocol (IGMP) proxy. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release 8.1
Command was introduced.
Functional Notes
This command is used in IP multicast stub applications in conjunction with the ip mcast-stub
helper-address, ip mcast-stub upstream, and ip mcast-stub downstream commands. When enabled,
the interface becomes a helper forwarding interface. The IGMP host function is dynamically enabled and
the interface becomes the active upstream interface, enabling the router to perform as an IGMP proxy.
Refer to
ip mcast-stub helper-address <ip address> on page
1042,
ip mcast-stub downstream on page
1999, and
ip mcast-stub upstream on page 2002
for more information.
Usage Examples
The following example sets the helper address as the IGMP proxy:
(config)#interface atm 1.1
(config-atm 1.1)#ip mcast-stub helper-enable
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2001

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents