The Visitor Has Not Pressed The Door Bell Key; You Are In A Conversation And The Door Bell Rings; Open The Door During A Door Call; Change To Another Door During A Door Call - Auerswald COMpact 2206 USB Operator's Manual

22

You like to take an Emergency Call

The Visitor has not pressed the Door Bell Key

b f (**)
internal dial tone (for Direct Exchange Line Telephone only)

You are in a Conversation and the Door Bell rings

g Y
conversation
door bell rings
(No. 1)
On the system telephone COMfortel 1500/2500, COMfort 1000/
1200/2000 plus and smar-tel-i (only on COMmander Basic) the
door bell ringing is shown in the menu. By pressing the key under
„door", you can open the door menu without interrupting the conversa-
tion (see manual of the telephone).

Open the Door during a Door Call

g (F)
door conversation (ignore with pulse dial)
In the menu of the system telephone COMfortel 1500/2500,
COMfort 1000/1200/2000 plus and smar-tel-i (only on COM-
mander Basic) „open" is used to open the door (see manual of the tele-
phone).

Change to another Door during a Door Call

g (F)
door conversation (ignore with pulse dial)
If your PBX is extended with a door/switching module the door bell key
inputs can be used as emergency inputs. An alarm may be signalled by
the ringing of an internal telephone as well as of an external telephone.
An alarm may be signalled by the ringing of an internal telephone as
well as of an external telephone. In order to finish the whole alarm
sequence, you are able to confirm the alarm as described here.

Your Telephone rings with the Alarm Rhythm

c b f
Alarm call to an internal
(special ringing rhythm)
or external telephone
COMpact 4410 USB or COMmander Basic: After picking up the
receiver an announcement text is played back that informs you
about the reason of the alarm
ment by Telephone and listen to it (COMpact 4410 USB and
COMmander Basic only) on page
(F) t
(ignore with number of the door
pulse dial) terminal
7 f
door opener activated, you will hear the
acknowledgement tone for app. 2 sec
6 g
door conversation with the other door terminal, if not busy
You like to take an Emergency Call
announcement text (COMpact
4410 USB and COMmander Basic)
Signal tone (COMpact 2206 USB)
(chapter Record the Alarm Announce-
47).
t g
telephone number
door conversation
of the door terminal
g
Query door conversation
(No. 2)
If the „door ringing" is switched on for your telephone and the Call-Wait-
ing signal is allowed, a door call will knock during a call and you will be
able to accept the waiting caller (see
Receiver on page
The telephone must have a permission configured by the configuration
program COMset to be able to open the door.
For some ISDN telephones the Query (or R) key must be pressed again
7
after the (maybe also „back"), in order to return to the door call.
If you do not confirm the alarm (also if you dialled a wrong digit), you will
hear the busy tone and the call will be automatically disconnected by the
PBX. There may be another alarm call if the other alarm subscribers do
not confirm the alarm either.
0
within 60 seconds with DTMF
telephone, DTMF sender or ISDN
telephone with DTMF signalling
For the PBX COMpact 2206 USB no alarm announcement is possible.
You hear a signal tone instead.
Start internal Query to call door terminal
chapter Call Waiting Tone in the
10).
g
back to the door
conversation
Finish door terminal call and switch to
the other door terminal
f a
2 seconds
confirm
confirming
alarm
tone
Call door terminal
Open the door
Confirm alarm