Configuring and Operating Functions
Call Through
Configuring the Exchange Line Settings for Call Through Calls
Requirements:
– External S
port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page FUNCTIONS > Call Through.
2. Enter a value in the Max. duration of an external Call Through call entry field under
Settings. The following entries are possible:
1 to 99: The PBX ends an external Call Through call after 1 to 99 minutes.
Further steps:
– Save your settings before you leave the page.
Configuring the Exchange Line Settings for Call Through Calls
You can configure which exchange line settings (e.g., exchange line authorization, call
restrictor (outgoing), call deblocker (outgoing)) should apply for Call Through.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External S
port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page FUNCTIONS > Call Through.
2. Configure the exchange line settings you want.
Note: Enabling/disabling or selecting an option can be carried out as
described in the help topics ( ). You do not have to carry out steps 1 and 2
described in the help topic (opening the page + selecting the subscriber).
Further steps:
– Save your settings before you leave the page.
220
)
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11