Properties / Function overview
Topics
–
Settings Subscriber Properties (page 595)
Settings Subscriber Properties
Proceed as follows:
•
Separately for subscribers
•
Using the Configuration Manager
•
Subscriber-related (page Subscriber (scr.) > Properties)
SUBSCRIBER
Select the subscriber you want to display/configure.
•
Function-related (page Subscriber (scr.) > Function overview)
Configure
Opens the configuration of the single function for all subscribers.
Important: The settings done are only valid on the condition that they
are not overridden by a profile. The simultaneous display takes place
only on page Subscriber (scr.) > Properties under Overridden by
profile in configuration.
[Name configuration] ...: In the displayed configuration, the function is
overridden by the displayed setting. Configuration using the Configu-
ration Manager (page Subscriber (scr.) > Profiles > ...)
not overridden by a profile: The function is currently not overridden by
a profile.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
Properties / Function overview
595