Overview Of The Connections And Other Device Components - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Installing and Switching on the PBX
Preparation

Overview of the Connections and Other Device Components

Overview of the Connections and Other Device Components
Overview Basic Unit
Top View
The figure below shows the components which will be accessible after removing the
cover panel based on the COMpact 3000 analog.
A "Default" button
B "Reset" button
C Label for telephone numbers of the subscribers at the inserted module
D Label for telephone numbers of analog subscribers
Note: The configured telephone numbers can be entered into the lower line.
Above, the telephone numbers are printed in the ex-factory state.
40
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11