Table of Contents
Advertisement
34
Connect a Loudspeaker System for Announcements
On the mainboard you have a Cinch connector (labelled „audio") for
announcements. This can be used as an audio output (for announce-
ments) or as an audio input (for Music on Hold).
If you like to use the Cinch connector as an audio output for announce-
ments, you will have to connect an amplified loudspeaker system or an
active loudspeaker (see
chapter Technical Data on page
If there is a COMpact TS module, you will also be able to
switch on/off the loudspeaker system or another device with
the relay function of the PBX.
Advice for COMpact 4410 USB: Use a COMpact-TS Module for door
functions in slot B. The Announcement/Music on Hold function will not
be available if you use a COMpact TS Module in slot C.
On the mainboard you have a Cinch connector (labelled „audio") for
announcements. This can be used as an audio output (for announce-
ments) or as an audio input (for external Music on Hold alternatively to
the internal Music on Hold).
You can connect an external music device (e.g. a CD player) to the
Cinch connector, if you like to use it as an input for external Music on
Hold. Another option may be the connection of a digital music and
speech memory that continuously plays a melody or a text.
The volume control for the external Music on Hold happens via a trim-
mer that is on the module near the Cinch connector (labelled with „Vol-
ume").
With this input, you can also record a music that will be stored as the
new internal Music on Hold in the PBX (only COMpact 4410 USB).
If you use external Music on Hold, pay attention to the copy-
right issues for certain music. Please contact the correspond-
ing copyright holder or music agency.
If a COMpact TS module is available, you are able to switch on/off the
external music source with the relay function of the PBX
Advice for COMpact 4410 USB: Use a COMpact-TS Module for door
functions in slot B. The Announcement/Music on Hold function will not
be available if you use a COMpact TS Module in slot C.
Connect a Loudspeaker System for Announcements
9).
Connection of an Input Device for external Music on Hold
(Pic.
41).
Pic. 40: Announcement Loudspeaker
Pic. 41: Music on Hold with CD Player
Hide quick links:
Advertisement
Table of Contents
