Switching Music On Hold In The Call Phase On/Off - Auerswald COMpact 3000 analog Operating Manual

– Enabled music on hold announcement
1. Open the page FUNCTIONS > Music on hold/announcement > Settings.
2. Enter a value in the Pause between announcements entry field. The following
entries are possible:
0 to 60: The music on hold is repeated at time intervals of 0 to 60 seconds.
Further steps:
– Save your settings before you leave the page.

Switching Music on Hold in the Call Phase On/Off

If music on hold is enabled in the call phase, the caller who is forwarded via transfer without
announcement hears music on hold instead of the call tone in the call phase.
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Music on hold/announcement > Settings.
2. Select or clear the Transfer without announcement in the call phase check box
under Music on hold.
Enables music on hold in the call phase.
Disables music on hold in the call phase.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Music on Hold and Announcement
Switching Music on Hold in the Call Phase On/Off
Functions
319