Call Forwarding For Subscribers - Auerswald COMmander 6000 Advanced Information

Functions, Uses, Concepts
Call Forwarding
If CF unconditional is enabled in addition to the CF on busy and/or CF
on no reply, all of the calls are forwarded immediately. In this case, the
other call forwarding types are overridden, but remain enabled. As soon
as CF unconditional is disabled, the other types that are still enabled
are again applicable.

Call Forwarding for Subscribers

When call forwarding (CF) for subscribers is used, internal and external calls
to a single phone can be rerouted to other internal phones or external
connections. In this way, the subscriber in question or his replacement can
take these calls on another phone.
Call forwarding for subscribers makes sure that the subscriber in question
or his replacement is always available at his own phone number, even if the
subscriber cannot take a call on his own phone.
Proceed as follows for configuration:
• Switching authorisations for the involved internal subscribers on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Authorisations)
Note: The forwarding subscriber needs an authorisation e.g. for external
destinations. For configuring using a character string on an internal
phone the subscriber needs an authorisation for controlling of the PBX.
• Configuring sufficient exchange line authorisations for the involved
internal subscribers.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Exchange line settings)
164
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018