Switching Call Forwarding For External Numbers On/Off - Auerswald COMpact 3000 analog Operating Manual

Functions
Call Forwarding

Switching Call Forwarding for External Numbers On/Off

If "CF unconditional" is enabled in addition to the "CF on busy" and/or "CF on
no reply," all of the calls are forwarded immediately. In this case, the other
kinds of call forwarding are overridden, but remain enabled. As soon as "CF
unconditional" is disabled, the other kinds that are still enabled are again
applicable.
Switching Call Forwarding for External Numbers On/Off
Note: An overview of the configured call forwardings can be configured as an
element on the portal page (Call forwardings MSN/DDI).
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Note: The control commands (keypad) defined in the PBX COMpact 3000
analogue for executing the function may differ from those provided by your
network provider. If there are malfunctions, ask your network provider about
the required control commands (keypad) and change the setting on the page
CONFIGURATION > External numbers > Analogue connection > Expert
configuration. If you would like to use the feature directly on the exchange
line instead, the subscriber needs the authorisation for configuring features
on the exchange line.
Switching Call Forwarding for External Numbers On/Off via the Configuration Manager
Requirements:
– External analogue port (only COMpact 3000 analogue), external S
COMpact 3000 ISDN or COMpact ISDN module available as an option) or external VoIP
channel
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Call forwarding.
206
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port (only
0