Private (Personalized) Exchange Line Access; Various Configurable Functions For Personal And Business Calls; Initiating Private Exchange Line Access - Auerswald COMpact 3000 analog Operating Manual

Functions

Private (Personalized) Exchange Line Access

Various Configurable Functions for Personal and Business Calls

Private (Personalized) Exchange Line Access
Private (personalized) exchange line access enables separate billing for business and
personal calls for individual employees. Using private exchange line access, calls initiated are
given a special identification while the call data is being recorded. This allows the charges to
be billed to the employee.
Various Configurable Functions for Personal and Business Calls
• Exchange line authorisation
• Call restrictor (outgoing)
• Call deblocker (outgoing)
• Short-code authorisation

Initiating Private Exchange Line Access

The subscriber that would like to make personal calls can initiate private exchange line access
on any internal telephone by entering the user PIN. Personal calls are assigned to the
subscriber in question in the call data record based on the user PIN.
Requirements:
– User PIN configured for the subscriber
1. Pick up the receiver of any internal telephone.
2. Dial ##92.
3. Enter the user PIN.
4. Dial *.
5. Enter the external telephone number. The following entries are possible:
External phone number
the exchange line access number before dialling the telephone number.)
** and short code number
omit the **.)
284
(If you do not use a direct exchange line access, dial
(If you do not use a direct exchange line access,
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020