Restarting The Tapi Server - Auerswald COMpact 3000 analog Operating Manual

- Windows 2008 Server 32/64-bit
- Windows 2008 Server R2 64-bit
- Windows 7 32-/64-bit
- Windows 8/8.1 32-/64-bit
- Windows 2012 Server
- Terminal server: Windows 2008 32/64-bit
- Windows 10 32-/64-bit
1. Start driver file (*.exe) on the server PC.
The TAPI driver installation is started.
2. Follow the installation by clicking Next.
3. Depending on the driver version, the driver may need to be activated at this point. If
you do not yet want to activate it, click the Später freischalten button.
4. In the IP address of the PBX entry field, enter the IP address of the PBX. Enter the
network port of the TAPI server in the Port entry field. Enter the password for the
network connection of the TAPI server in the Password and Repeat password entry
fields. Click OK.
5. Click Close.
6. Restart the PC.

Restarting the TAPI Server

Performing this procedure can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > LAN TAPI > LAN TAPI configuration.
2. Click Restart under Restart TAPI server.
The TAPI server restarts.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Functions
LAN-TAPI
Restarting the TAPI Server
253