Restarting The Tapi Server; Checking The Function Of The Lan-Tapi - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

2. Follow the installation by clicking Next.

3. Depending on the driver version, the driver may need to be activated at this point. If

you do not want to activate it yet, click the Activate later button.

4. In the IP address of the PBX entry field, enter the IP address of the PBX. Enter the

network port of the TAPI server in the Port entry field. Enter the password for the

network connection of the TAPI server in the Password and Repeat password entry

fields. Click OK.

5. Click Close.

6. Restart the PC.

Restarting the TAPI Server

Proceed as follows:

• Using the configuration manager

1. Open the page Functions > LAN TAPI.

2. Click Restart under Restart TAPI server.

To perform a simple function check of the TAPI driver (TSP) as well as the settings configured

in the PBX, use the dialling help on Windows on the server PC.

Proceed as follows:

• Using the server PC

Checking the Function of the LAN-TAPI on Windows 7/Windows 8/8.1

Requirements:

• A completed TAPI drive installation on the server PC

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Restarting the TAPI Server

Compact 5000r