Table of Contents
Advertisement
LAN-TAPI
For a CTI solution, the PBX can be connected to a local network (CTI server
and CTI clients). This requires CTI software, e. g. PBX Call Assist / 2. Alter-
natively, we recommend the following software manufacturers:
•
ESTOS (www.estos.de)
•
ilink (direct.ilink.de)
The LAN-TAPI provides the TAPI 2.1 interface over the Ethernet port on the
PBX.
A Microsoft server then distributes the functionality throughout the network
(third party network connection) onto the separate Microsoft computers so
that telephony software, e.g., PBX Call Assist / 2 or other TAPI applications
can use the TAPI functions. The PBX is addressed by the server over the
Ethernet interface. When a user wants to dial from the client PC, the
command is forwarded to the server. The server signals this to the PBX
which then establishes the connection.
LAN-TAPI supports the following phones connected to the PBX:
•
IP and ISDN system phones
•
ISDN phones
•
Analogue phones
•
Standard VoIP phones (SIP)
LAN-TAPI supports the following functions:
•
Display of the called MSN (multi-company operation)
•
Call forwarding (CFU, CFB, CFNR)
•
Call deflection (forwarding before call acceptance)
•
Transfer
•
Conference call
•
Toggling between conversations
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
LAN-TAPI
119
Advertisement
Table of Contents
