Configuring and Operating Functions
Call Deblocker (Outgoing) – Release Codes
Switching the Call Deblocker (outgoing) On/Off
Call Deblocker (Outgoing) – Release Codes
Call deblockers can be added to the exchange line authorizations to expand dialling options
with additions of a certain supply of numbers (telephone numbers for specific connections or
specific prefixes). Since call deblockers have a higher priority than call restrictors, they can be
used to release restricted numbers or parts of them.
Switching the Call Deblocker (outgoing) On/Off
Switching this on/off can be done as follows:
• Separately for subscribers
• Separately for business and personal calls
• Separately for configurations
• For the exchange line transfer function (FUNCTIONS > Transfer > Exchange line
transfer)
• For the Call Through function (FUNCTIONS > Call Through > Exchange line settings)
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Configured call deblocker
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Exchange line settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear each the business and private check boxes under Call deblocker
(outgoing).
Enables the call deblocker.
Disables the call deblocker. (No other action is required.)
4. Select the call deblocker you want in the corresponding business and private list
fields under Call deblocker (outgoing).
194
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11