Configuring The Exchange Line Settings For Exchange Line Access To Be Transferred - Auerswald COMpact 3000 analog Operating Manual

Functions
Exchange Line Transfer

Configuring the Exchange Line Settings for Exchange Line Access to be Transferred

4. Configure the following settings that apply to all of the telephones:
The exchange line settings for the exchange line access to be transferred
Callback option
Subscribers for the charge burden
Time limit for initiating an external call
Configuring the Exchange Line Settings for Exchange Line Access to be Trans-
ferred
You can configure which exchange line settings (e.g., exchange line authorisation, call
restrictor (outgoing), call deblocker (outgoing)) should apply to the telephone after the transfer.
When this is done, either special exchange line settings can be configured or you can fall back
on the exchange line settings of the line to be transferred.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– For executing the exchange line transfer: System telephone with configured function key for
the exchange line transfer
– Internal S port (only available on the optional COMpact S
0
module) or internal VoIP channels (COMpact 3000 VoIP or VoIP channels acquired in the
Upgrade Center and released)
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > Transfer.
2. Select on of the following options in the Exchange line settings for the manually
switched exchange line access list field under Exchange line transfer.
Configure special exchange line settings: Special exchange line settings
are configured for the telephone.
Exchange line authorisation of the switching subscriber: After the transfer,
the telephone takes on the transferred exchange line settings after the transfer
has been made. (No other action is required.)
3. Configure the exchange line settings you want.
198
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
module or COMpact ISDN
0