Management Voice Mail/Fax Function And Memory - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Functions, Uses, Concepts

Voice mail/Fax Boxes

Management Voice Mail/Fax Function and Memory

If the voice mail function is used without the COMmander VMF(-R) module,

announcements for the voice mailboxes, language files, and incoming voice

messages, are stored on the necessary USB data storage device.

After the COMmander VMF(-R) module has been inserted, the announce-

ments for the voice mailboxes, language files, and also incoming faxes and

voice messages, are saved to the memory card in the COMmander VMF(-

Caution: Do not remove the USB data storage device from

the PBX while the system is running.

For technical reasons, the mainboard's voice mail channels are

switched off when the COMmander VMF(-R) module is inserted. Any

voice mailboxes that have been previously configured are switched off.

Existing announcements/recordings can no longer be accessed (the

COMmander VMF(-R) module uses its own SD card instead of the

USB data storage device). If you want to keep an announcement/

recording, save it to the hard disk before inserting this module.

• Announcements: Using the Configuration Manager (page Devices >

Voice mail/fax boxes > Properties > Announcements.

• Recordings: Using the Configuration Manager (page User data >

Call data > Messages)

• Switch off the PBX before removing the data storage

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r